Tube Microphone Preamps Versus Solid State Microphone Preamps
A microphone preamp is used to amplify a low input voltage signal into high voltage signal, which can be used for various applications. It helps in increasing the gain of a microphone and makes the output more stable. A microphone preamp is also called mic preamp or sometimes mic pre. There are two basic types of microphone preamps: Solid state mic preamps and tube mic preamps. They both are used in different applications depending on their specifications.
Solid state microphone preamps use transistors or opamps for amplification. These preamps are generally more noise resistant than tube preamps. They are even resistant to their own self-noise. They are more transparent and cleaner than a tube preamp. Due to its transparent quality they lack a definitive sound which is present in the tube version. Solid state mic preamps have undergone evolutionary changes and have come out stronger each time. They produce low distortion and are highly stable.
Tube mic preamps are generally more expensive as compared to solid state preamps. They are a natural choice for vocalists as it helps to improve the tone quality, and helps in achieving a more natural and audio compression. Since no two voices are same, capturing the uniqueness in each voice with clarity is a tough job. But using a tube preamp the sonic character of the voice can be captured to enhance the vocal quality. The noise level is increased a bit, but it is inconsequential when you consider the sound quality. The sound from a tube preamp is characterized by its warmth, presence and clarity. Tube preamps should not be used in places where authentic reproduction of sound is required unless you are using class b Circuitry.
Some Tube Microphone Preamps
 Art Pro Channel Tube Mic Preamp  US $200.00
|
 Vintage Sony Sra 3 Sra3 Tube Mic Line Preamp Recording US $350.00
|
 Art Pro Channel Tube Mic Preamp And Compressor With Eq US $111.49
|
 Bellari Rp220 Dual Tube Mic Preamp Rp 220 Proaudiostar US $369.95
|
 Art Pro Mpa 2 Channel Tube Mic Pre Amp US $200.00
|
 Art Tube Mic Gtr 2 Channel Pre Amp Perfect Condition US $205.34
|
 Universal Audio 2 610 Dual Tube Mic Preamp US $1,300.00
|
 New Presonus Studio Channel Tube Recording Mic Pre Amp US $299.00
|
 Presonus Tubepre Tube Mic Preamp New Extras US $129.00
|
The nature of distortion is what makes sound from two mic preamps different. Solid state circuits can sometimes run out of headroom when power supply voltage falls below output voltage. This results in a wayward distortion. In tube circuitry distortion makes the instruments more musical as they also produce primarily even harmonics as primary distortion do in tube preamps. Tube circuits always generate a certain amount of harmonic distortion. Low pass filtering of the sound leads to generation of what ids known as "tube warmth". Some preamps use a hybrid version, where both the preamps are used. The solid stage preamp is followed a by a tube stage, which helps in achieving better sound quality
Solid state pre amp helps drummers and guitarists and they need fast transient response times from their equipments. Solid state preamps tend to jump from low distortion to high distortion, which can be a good thing for drummers. If maintained at a maximum level, it can provide outstanding performance. Acoustic guitars require quality preamps and a solid state preamp is a better option. Tube preamps, basically transformerless, are more suited for vocalists. A tube preamp with warm midrange and smooth high frequencies often works best. One of the main applications of tube mic preamp is as a processing channel for microphone.
Both tube and solid state preamps when properly designed according to the needs your specification and budget can provide excellent results. If individually they cannot provide the output, then hybrid preamps can also be used.
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
